WaveDriver 10 Potentiostat/Galvanostat System

Products

To view pricing, you must create an account and login using the "ACCOUNT" menu above.

The WaveDriver® 10 Potentiostat/Galvanostat System is a cost-effective, yet powerful and versatile, benchtop instrument whose value cannot be beaten.  With a modest form factor and convenient USB interface, the WaveDriver 10 packs a punch with iR compensation, ability to form over 38 different electrochemical techniques, and controlled through AfterMath® Data Organizer software.  The WaveDriver 10 blends much of what you need from a potentiostat without the added frills that can sometimes simply drive up the cost.  Key features of the WaveDriver 10 are as follows:

  • Applied/Measured Current:  ±100 nA to ±1 A
  • Applied/Measured Voltage: ±10 V (two ranges, ±2.5 V and ±10 V)
  • Operation Modes:  Potentiostat, Galvanostat, OCP, ZRA
  • iR Compensation: Current Interrupt or Positive Feedback
  • Techniques:  All common DC sweep and step experiments plus specialty corrosion, rotating, and spectroelectrochemistry techniques

See "Description" tab below for additional information.

The WaveDriver 10 Potentiostat is being phased out in favor of the WaveDriver 200 Integrated Bipotentiostat with EIS.

To view pricing, you must create an account and login using the "ACCOUNT" menu above.

#DescriptionPrice in USD
Potentiostat Bundles
[WD10-BASIC]

Basic Bundle
includes WaveDriver 10 potentiostat, software, and cell cable

[WD10-CELL]

Electrochemical Cell Bundle
includes WaveDriver 10 potentiostat, software, cell cable, working, counter, and reference electrodes, and electrochemical cell

Rotating Electrode Bundles
[WD10-RDE]

Rotating Disk Electrode Bundle
includes WaveDriver 10 potentiostat, software, electrode rotator, rotating disk electrode and shaft, counter electrode, cell, cables, and accessories

[WD10-RCE15]

Rotating Cylinder Electrode Bundle
includes WaveNow potentiostat, software, electrode rotator, rotating cylinder electrode, counter electrode, 1 L corrosion cell with accessories, and cables

The WaveDriver 10 requires a power cable.  Specify the appropriate power cord style during order.  Pine Research offers a wide variety of plug styles.

The WaveDriver® 10 is an affordable benchtop potentiostat/galvanostat system capable of performing a wide variety of traditional single working electrode methods.  The WaveDriver 10 is a robust single channel potentiostat, with an impressive current range from ±100 nA up to ±1 A, advanced input, output, and waveform filters, and  iR compensation.  The WaveDriver 10 connects to your laptop or PC via a standard USB cable and is controlled by our power AfterMath® Data Organizer software application.  Rear panel connections allow rotation rate control when using rotating disk, cylinder, or ring-disk electrodes.  Additional connections for analog input/output and synchronized timing permit the WaveDriver to be used in conjunction with other instruments.

Affordable.  Take a look around at similar potentiostat/galvanostat systems and you will have a difficult time finding one with comparable specs and capabilities at the same modest price point.  Pine Research strives to bring you cost-effective electrochemical instrumentation.  The WaveDriver 10 also includes a four option dummy cell for calibration checking and instrument function testing, at no additional cost.

Versatile.  Capable of performing up to 38 different techniques, the WaveDriver 10 is an all-around performer.  It finds use in academic and industrial research around the world.  Unlike many of its peers, the WaveDriver 10 was built to perform a little bit of everything and without added cost of different software “upgrades.”

Capable. Designed with the everyday user in mind, the specifications for the WaveDriver 10 potentiostat is broad enough to permit you to perform a wide range of routine electrochemical techniques but also prudently chosen to allow for a simple and affordable design. Popular and common techniques such as cyclic voltammetry, bulk electrolysis, differential pulse voltammetry, square wave and pulse voltammetry, battery charge/discharge sequences, corrosion-based analysis such as linear polarization resistance, chronoamperometry, and chronopotentiometry are easily configured and executed using our AfterMath software package.

Visit our YouTube channel for helpful instructional videos regarding the use and maintenance of this and many other Pine Research products.

All specifications are subject to change without notice.
WaveDriver 10 Potentiostat

Applied and Measured Voltage Ranges

±2.5 V, ±10 V

Applied and Measured Current Range

±100 nA to ±1 A

Interface

USB

Functions

Potentiostat, Galvanostat, OCP, ZRA

Technique List

click here for a list of techniques

Additional Specifications

click here for a complete list of specifications

Document #Title
WaveDriver 10 Potentiostat

DRU10001

WaveDriver 10 User Guide
click here to download (4 MB download)

DRB10073

WaveDriver Brochure
click here to download (964 KB download)

DRK10057

Controlling a Pine Research Rotator with a Pine Research Potentiostat
click here to download (370 KB download)

Troubleshooting

DRK10039

Troubleshooting Noise in an Electrochemical System
click here to download (156 KB download)

Contact us with any questions or support requests by phone or e-mail.

Everything you want to know about AfterMath Data Organizer software is found in our knowledgebase.

Get to know your WaveDriver 10 - everything is on our knowledgebsae.